Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual page 176

Configuring Secure Access Devices Guide
Table 38: Configuring Network Connect Connection Profile Details (continued)
Options
DNS Settings
Primary DNS
Secondary DNS
DNS Domain(s)
WINS
Auto-allow IP's in DNS/WINS settings
(only for split-tunnel enabled mode)
DNS search order
Proxy tab
Network Connect proxy server
configuration
PAC Server Address
PAC Update Frequency (minutes)
Static Proxy Server
Static Proxy Port
Roles Selection tab
Roles Selections
Related
Documentation
158
Your Action
Select of the following options from the drop-down list:
Custom DNS Settings —This option sends the custom device DNS settings.
DHCP DNS Settings—This option sends the values the DHCP server sends to the
device.
Enter the IP address for the primary DNS.
Enter the IP address for the secondary DNS.
Enter the DNS domain(s), such as "yourcompany.com", "yourcompany.net".
Enter the WINS resolution name or IP address.
Select this check box if you want to create an allow rule for the DNS server.
Select one of the following options from the drop-down list:
Search client DNS first, then the device.
Search the device's DNS servers first, then the client.
Select one of the following options from the drop-down list:
No proxy server—Specifies that the new profile requires no proxy server.
Automatic (URL for PAC file on another server)—Specifies the URL of the server
on which the PAC file resides, and the frequency (in minutes) with which Network
Connect polls the server for an updated version of the PAC file.
Manual configuration—Specifies the IP address or the hostname of the server
and provides the port assignment.
Enter the PAC server address. This option is enabled only when you select Automatic
(URL for PAC file on another server) from the Network Connect proxy server
configuration option.
Enter the PAC update frequency. The default value is 10.
Enter the static proxy server address. This option is enabled only when you select
Manual configuration from the Network Connect proxy server configuration option.
Enter the static proxy port value. The default value is 0.
Select the members from the Members list. You can add or remove the non-members
to members by using the Add/Remove options.
Configuring Web Rewriting Resource Policies (NSM Procedure) on page 151
Defining Network Connect Split Tunneling Policies (NSM Procedure) on page 159
Copyright © 2010, Juniper Networks, Inc.