Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual page 254

Configuring Secure Access Devices Guide
236
Table 65: Configuring Host Checker Third-Party Applications Using
Predefined Rules Details (continued)
Option
Successful System Scan
must have been performed
in the last: (days)
Consider this rule as passed
if 'Full System Scan' was
started successfully as
remediation.
Enable virus definitions
update check
Virus Definition files should
not be older than (updates)
Monitor this rule for change
in result
Enable Download latest virus
definition files for all
supported products
Enable Turning on Real Time
Protection for all supported
products
Enable Starting of Antivirus
Scan for all supported
products
Selected Vendors tab
Selected Vendors
Specific Products Selected tab
Specific Products Selected
Selected Products tab
Product name
Function
Specifies the days to
perform the system scan.
Passes the rule if system
full scan starts successfully
as remediation.
Checks for the viral
updates.
Specifies the update of
client Virus definition files
the client must use.
Continuously monitors the
policy compliance of
endpoints.
Allows you to download
latest virus definition files
for all supported products.
Enables turning on real time
protection for all supported
products.
Scans supported products
with antivirus scan.
Allows you to select the
specific vendors.
Allows you to select the
specific products.
Allows you to select the
product.
Copyright © 2010, Juniper Networks, Inc.
Your Action
Enter the days.
Select the Consider this rule as
passed if 'Full System Scan' was
started successfully as
remediation. to enable this feature.
Select the Enable virus definitions
update check to enable this
feature.
Enter a number between 1 and 10.
For example: If you enter 1, the
client must have the latest update.
You must import the virus signature
list for the supported vendor.
Select the Monitor this rule for
change in result to enable this
feature.
Select the Enable Download latest
virus definition files for all
supported products to enable this
feature.
Select the Enable Turning on Real
Time Protection for all supported
products to enable this feature.
Select the Enable Starting of
Antivirus Scan for all supported
products to enable this feature.
Select the vendor, and then click
Add to move the vendor from the
Non-members to the Members list.
Select the product, and then click
Add to move the product from the
Non-members to the Members list.
Select the product from the
Product name drop-down list.