Configuring A Secure Access Anonymous Server Instance (Nsm Procedure); Configuring A Secure Access Etrust Siteminder Server Instance; Procedure); Configuring A Secure Access Etrust Siteminder Server Instance (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual

Configuring Secure Access Devices Guide

Configuring a Secure Access Anonymous Server Instance (NSM Procedure)

Related
Documentation

Configuring a Secure Access eTrust SiteMinder Server Instance (NSM Procedure)

174
The anonymous server feature allows users to access the Secure Access device without
providing a username or password. Instead, when a user enters the URL of a sign-in page
that is configured to authenticate against an anonymous server, the Secure Access device
bypasses the standard Secure Access device sign-in page, and immediately displays the
Secure Access device welcome page to the user.
To configure an anonymous server instance:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the Secure Access device for which
2.
you want to configure authentication protocol sets.
Click the Configuration tab and select Authentication > Auth Servers. The
3.
corresponding workspace appears.
NOTE: If you want to update an existing server instance, click the
appropriate link in the Auth Server Name box and perform the Steps 5
through 8.
Click the New button. The New dialog box appears.
4.
Specify a name to identify the server instance.
5.
Select Anonymous Server from the Auth Server Type list.
6.
Click one:
7.
OK—Saves the changes.
Cancel—Cancels the modifications.
Configuring a Secure Access eTrust SiteMinder Server Instance (NSM Procedure) on
page 174
Configuring a Secure Access Certificate Server Instance (NSM Procedure) on page 184
Configuring a Secure Access RADIUS Server Instance (NSM Procedure) on page 171
Within the Secure Access device, a SiteMinder instance is a set of configuration settings
that defines how the Secure Access device interacts with the SiteMinder policy server.
To configure the SiteMinder server instance:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the Secure Access device for which
2.
you want to configure eTrust SiteMinder server instance.
Copyright © 2010, Juniper Networks, Inc.