Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual page 198

Configuring Secure Access Devices Guide
180
Table 44: Secure Access eTrust SiteMinder Configuration
Details (continued)
Option
Authentication Type >
Delegate to a Standard Agent
Siteminder Settings > Authorization tab
Authorize requests against
SiteMinder policy server
Function
Delegates authentication to a
standard agent. When the user
accesses the Secure Access
device sign-in page, the Secure
Access device determines the
FCC URL associated with the
protected resource's
authentication scheme. The
Secure Access device redirects
the user to that URL, setting
the Secure Access device
sign-in URL as the target. After
successfully authenticating
with the standard agent, an
SMSESSION cookie is set in
the user's browser and the user
is redirected back to the
Secure Access device. The
Secure Access device then
automatically signs in the user
and establishes a Secure
Access session.
Uses SiteMinder policy server
rules to authorize user Web
resource requests. If you select
this option, make sure that you
create the appropriate rules in
SiteMinder that start with the
server name followed by a
forward slash, such as:
"www.yahoo.com/",
"www.yahoo.com/*", and
"www.yahoo.com/r/f1".
Copyright © 2010, Juniper Networks, Inc.
Your Action
Select Siteminder Settings >
Authentication >
Authentication Type >
Delegate to a Standard Agent
option from the Authentication
Type drop-down list.
Select Siteminder Settings >
Authorization >Authorize
requests against SiteMinder
policy server.