Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual page 159

Copyright © 2010, Juniper Networks, Inc.
Table 33: Configuring File Rewriting Resource Policies Details (continued)
Option
Fixed Password
Windows SSO > Detailed Rules tab
Action
Chapter 10: Configuring Secure Access Resource Policies
Function
Specifies a static password to
the Windows share or
directory.
NOTE: This box is enabled
only when you select the Use
Specified Credential(Fixed
Password)... option from the
Action drop-down list.
Specifies the action to take
when a resource requires
credentials.
Your Action
Enter the static password.
Select one of the following
from the drop-down list:
Use System
Credentials...—Secure
Access device submits the
stored credentials to
resources.
Use Specified
Credentials(Variable
Password)...—Secure
Access device uses
specified credentials with
variable password to pass
to the Windows share or
directory
Use Specified
Credentials(Fixed
Password)...—Secure
Access device uses
specified credentials with
fixed password to pass to
the Windows share or
directory.
Prompt for user
credentials—Secure Access
device intermediates the
share challenge by
presenting an
authentication challenge in
the Secure Access device
the first time a user
attempts to access the
share.
Detailed Rules—Specifies
one or more detailed rules
for this policy.
141