Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual page 134

Configuring Secure Access Devices Guide
116
Table 26: Configuring Custom Web Applications Resource Profile
Details (continued)
Option
Action
Resource
Autopolicy: Java Applet Access Control
Name
Server Resource
Function
Specifies the action to perform
by the cache cleaner on the
resource.
Specifies the resources to
which this policy applies.
Specifies the name of the
policy.
Specifies the server resources
to which this policy applies.
Copyright © 2010, Juniper Networks, Inc.
Your Action
Select one of the following
option:
Smart Caching (send
headers appropriate for
content and
browser)—Allows the
Secure Access device to
send a
cache-control:no-store
header or a
cache-control:no-cache
header based on the user's
Web browser and content
type.
Don't Cache (send "Cache
Control: No
Store")—Delivers
attachments to Internet
Explorer without saving
them to the disk. (The
browser temporarily writes
files to the disk, but
immediately removes them
once it has opened the file
in the browser.)
Don't Cache (send
"Pragma: No
Cache")—Prevents the
user's browser from caching
files to the disk.
Unchanged (do not
add/modify caching
headers)—Secure Access
device forwards the origin
server's caching headers as
is.
Remove Cache-Control:
No-Cache/No-Store—
Removes the Cache
Control:No Cache and
Pragma:no-cache headers.
Enter the resource name.
Enter the policy name.
Enter the path using the
format: host:[ports].