Configuring Client-Side Logs (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual

Configuring Secure Access Devices Guide

Configuring Client-Side Logs (NSM Procedure)

310
Client-side logging is useful when working with the Juniper Networks Support team to
debug problems with an Secure Access device client-side feature. When you enable
logging for a feature, the Secure Access device writes a log to any client computer that
uses the feature. (These settings are global, which means that the Secure Access device
writes a log file to all clients that use the enabled feature.) The Secure Access device
then appends to the log file each time the feature is invoked during subsequent user
sessions. Once the Secure Access device has written a log file to a user's computer, it
does not remove it. If users want to remove the log files, they must manually delete them
from their computers.
To configure client-side logs:
In the navigation tree, select Device Manager > Devices. Click the Device Tree tab,
1.
and then double-click the Secure Access device for which you want to configure a
client-side logs.
Click the Configuration tab. Select system >Log/Monitoring > Client Logs.
2.
Add or modify settings as specified in Table 92 on page 310.
3.
Click one:
4.
OK—Saves the changes.
Cancel—Cancels the modifications.
Table 92: Configuring Client-Side Logs Details
Option Function
Host Checker Secure Access device writes
client-side logs of Host Checker.
Cache Cleaner Secure Access device writes
client-side logs of Cache Cleaner.
Meetings Secure Access device writes
client-side logs of Secure Meeting.
Windows Secure Secure Access device writes
Application Manager client-side logs of SAM.
Java Secure Secure Access device writes
Application Manager client-side logs of Java Secure
and Applet Application Manager and Applet.
Rewriting
Network Connect Secure Access device writes
client-side logs of Network Connect.
Your Action
Select the Host Checker to
enable this feature.
Select the Cache Cleaner to
enable this feature.
Select the Meetings to enable
this feature.
Select the Windows Secure
Application Manager check box
to enable this feature.
Select the Java Secure
Application Manager and Applet
Rewriting to enable this feature.
Select the Network Connect to
enable this feature.
Copyright © 2010, Juniper Networks, Inc.