Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual page 44

Configuring Secure Access Devices Guide
26
Set the admin user password and the first connection one-time password:
9.
Enter a new password in the Set Password box.
a.
Confirm the new password and click OK.
b.
NOTE:
Make a note of the unique external ID. The device administrator will
need it to configure connectivity with NSM. The wizard automatically
enters this value for the device. This ID number represents the device
within the management system.
Specify the administrator username and password for the SSH
connection. This name and password must match the name and
password already configured on the device.
Specify the first connection one time password (OTP) that authenticates
the device. Make a note of this password. The device administrator will
need it to configure the connectivity with NSM.
Click Finish to add the cluster member to the NSM GUI. The cluster member appears
10.
in the Devices workspace.
Adding Cluster Members through Reachable Workflow
To add a cluster member:
From the left pane of the NSM UI, click Configure.
1.
Expand Device Manager and select Devices. The Devices workspace appears on the
2.
right side of the screen.
Click the Device Tree tab, and select the cluster to which you want to add the members.
3.
Click the New button and select Cluster Member. The New–Cluster Member dialog
4.
box appears.
Enter the cluster member name, select Device Is Reachable and click Next.
5.
Specify the device connection settings:
6.
IP Address—IP address of the Secure Access device.
Admin User Name—Administrator user name created for the Secure Access device.
Password—Administrator password created for the Secure Access device.
Click Next, The Secure Access device is detected and the device details are displayed.
7.
Enter a new name for the Secure Access device in Device Name to change the host
8.
name of the device.
Click Finish to add the cluster member to the NSM GUI. The cluster member as a child
9.
of the Secure Access cluster in the Devices workspace.
Copyright © 2010, Juniper Networks, Inc.