Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual page 172

Configuring Secure Access Devices Guide
154
Table 37: Configuring Web Rewriting Resource Policy Details (continued)
Option Function
Rewrite XML Allows Secure Access device to
rewrite URLs contained within XML
content.
Rewrite external Allows Secure Access device to
links rewrite all URLs.
Block cookies from Allows Secure Access device to
being sent to the block cookies destined for the
browser client's browser.
Host-Header Allows Secure Access device to pass
forwarding the hostname as part of the host
header instead of the actual host
identifier.
ActiveX Parameters
Class Id Specifies class ID of the ActiveX
control that you want to control with
the policy.
Description Describes the policy.
Parameters > Specifies the ActiveX parameters
Parameter that you want to control with the
policy.
Rewriting Filter
Bug Specifies the bug created for the
device.
Description Describes about the bug.
Enabled Specifies if the bug needs to be
filtered.
Web Proxy > Web Proxy Servers tab
Name Specifies the name or IP address of
the Web proxy server and the port
number at which the proxy server
listens.
Host Specifies the hostname of the Web
proxy server.
Port Specifies the port number at which
the proxy server listens.
Web Proxy > Web Proxy Policies > General tab
Your Action
Select the Rewrite XML to enable
this feature.
Select the Rewrite external links to
enable this feature.
Select the Block cookies from being
sent to the browse to enable this
feature.
Select the Host-Header forwarding
check box to enable this feature.
Enter the class ID.
Enter the description.
Enter the parameters.
Enter the bug information.
Enter the description for the bug.
Select Enabled to enable this
feature.
Enter the name or IP address.
Enter the hostname.
Enter the port.
Copyright © 2010, Juniper Networks, Inc.