Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual page 197

Copyright © 2010, Juniper Networks, Inc.
Table 44: Secure Access eTrust SiteMinder Configuration
Details (continued)
Option
Form POST Port
Form POST Path
Form POST Parameters
Chapter 11: Configuring Authentication and Directory Servers
Function
Specifies the port for the
protocol.
NOTE: This field is displayed
only when you select the Form
POST option from the
Authentication Type
drop-down list.
Specifies the path of the
sign-in page.
NOTE: This field is displayed
only when you select the Form
POST option from the
Authentication Type
drop-down list.
Specifies the post parameters
to be sent when a user signs in.
NOTE: This field is displayed
only when you select the Form
POST option from the
Authentication Type
drop-down list.
Your Action
Enter port 80 for HTTP or port
443 for HTTPS.
Enter the path of the Web
agent's sign-in page.
NOTE: The path must start
with a backslash (/) character.
In the Web agent sign-in page
URL, the path appears after
the Web agent.
Enter the post parameters.
Common SiteMinder variables
that you can use include _
_USER_ _, _ _PASS_ _, and _
_TARGET_ _. These variables
are replaced by the username
and password entered by the
user on the Web agent's
sign-in page and by the value
specified in the Target field.
These are the default
parameters for login.fcc—if you
have made customizations,
you may need to change these
parameters.
179