Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual page 75

Copyright © 2010, Juniper Networks, Inc.
Chapter 7: Configuring Terminal Services Using Remote Access Mechanism
Table 12: User Role Terminal Services Configuration Details (continued)
Option
Host
Client Port
Server Port
Screen Size
Color Depth
Terminal Services > Terminal Services Sessions > Type > Citrix using default ICA file >
Start Application tab
Path to application
Working directory
Terminal Services > Terminal Services Sessions > Type > Citrix using default ICA file >
Session Reliability tab > Connect Devices tab
Connect drives
Connect printers
Connect COM Ports
Terminal Services > Terminal Services Sessions > Type > Citrix using default ICA file >
Session Reliability tab
Function
Specifies the hostname or IP
address of the Metaframe
terminal server.
Specify the client port on
which the user client
communicates to the terminal
server.
Specifies the server port on
which the terminal server
listens to the user client.
Allows you to change the size
of the terminal services
window on the user's
workstation. (By default, the
Secure Access device sets the
window size to full screen.)
Allows you to change the
color-depth of the terminal
session data. (By default, the
Secure Access device sets the
color depth to 8-bit.)
Specifies where the
application's executable file
resides on the terminal server.
Specifies where the terminal
server should place working
files for the application.
Allows user to access local
drives through the terminal
session.
Allows user to access local
printers through the terminal
session.
Allows user to access local
COM ports through the
terminal session.
Your Action
Enter the hostname or IP
address.
Enter the client port.
Enter the server port.
Select Full Screen, 800x600,
1024x768, or 1280x1024 from
the drop–down list.
Select 8-bit, 15-bit, 16-bit,
24-bit, or 32-bit (True Color)
from the drop–down list.
Enter the path.
Enter the path.
Select the Connect drives
check box to enable this
feature.
Select the Connect printers
check box to enable this
feature.
Select the Connect COM Ports
check box to enable this
feature.
57