Creating Meeting Urls - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual

Configuring Secure Access Devices Guide

Creating Meeting URLs

210
Table 55: User/Administrator URLs Configuration Details (continued)
Option Function
Administrator > Moves the selected admin realms from
Selected Admin non-members to members.
Realms >
Non-members
User > Meeting URL Specifies the URL that controls the
sign-in page, which you can view when
you sign into a meeting on the Secure
Access device.
User > Selected User Moves the selected user realms from
Realms > non-members to members.
Non-members
To configure a meeting URL:
In the NSM navigation tree, select Device Manager > Devices. Click the Device Tree
1.
tab, and then double-click the Secure Access device for which you want to configure
a meeting URL.
Click the Configuration tab, and select Authentication > Signing In > Sign-in Policies
2.
> Meeting URLs. The corresponding workspace appears.
Add or modify settings on the meeting URL as specified in Table 56 on page 210.
3.
Click one:
4.
OK—Saves the changes.
Cancel—Cancels the modifications.
Table 56: Meeting URLs Configuration Details
Option Function
User Type Specifies the type of sign-in
policy.
Sign-in URL Specifies the URL that you want
to associate with the meeting
URL policy.
Description Describes of the meeting URL
policy.
Enable Enables or disables the individual
policy.
Your Action
Select the admin realms from
Non-members to Members.
Select the meeting URL from the
drop-down list.
Select the user realms from
Non-members to Members.
Your Action
Select the type of policy from the
drop-down list (for example, enter
Meeting).
Enter a valid URL.
NOTE: Use the format <host>/<path>
where<host> is the hostname of the device
and <path> is any string that you enter.
Enter a description of the meeting URL
policy.
Select Meeting URLs > Enable to enable
this option.
Copyright © 2010, Juniper Networks, Inc.