Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual page 54

Configuring Secure Access Devices Guide
36
Table 7: User Role Configuration Details
Option
General tab
Name
General > Overview tab
Description
VLAN/Source IP
Session Options
UI Options
Web
Windows Files
NFS Files
Secure Application Manager
Telnet/SSH
Function
Specifies a unique name for
the user role.
Describes the user role.
Specifies role-based source IP
aliases.
Specifies the session time
limits, roaming capabilities,
session and password
persistency, request
follow-through options, and
idle timeout application
activity.
Specifies customized settings
for the Secure Access device
welcome page and the
browsing toolbar for users
mapped to this role.
Enables you to intermediate
Web URLs through the
Content Intermediation
Engine.
Controls access to resources
on Windows server shares.
Controls access to resources
on UNIX/NFS servers.
Provides secure,
application-level remote
access to enterprise servers
from client applications.
Enables users to connect to
internal server hosts in the
clear using Telnet protocols or
to communicate over an
encrypted Secure Shell (SSH)
session through a Web-based
terminal session emulation.
Copyright © 2010, Juniper Networks, Inc.
Your Action
Enter a name.
Enter a brief description for the
user role.
Select General >
VLAN/Source IP to apply
settings for the role.
Select General > Session
Options to apply settings for
the role.
Select General > UI Options to
apply custom settings for the
role; otherwise, the Secure
Access device uses the default
settings.
Select General > Web to
enable this access feature for
the role.
Select General > Windows
Files to enable this access
feature.
Select General > NFS Files to
enable this access feature.
Select General >Secure
Application Manager to enable
this access feature.
Select General > Telnet/SSH
to enable this access feature.