Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual page 276

Configuring Secure Access Devices Guide
Related
Documentation
258
Table 74: Configuring Network Communications Protocol Details
Option Function
NCP Allows you to specify internal protocols
Auto-Select to communicate between the Secure
Access device server and client
applications.
Read Allows you to specify the timeout
Connection interval for Java clients (15 to 120
Timeout seconds). Note that this value does not
(seconds) apply to user inactivity in client
applications.
Idle Connection Allows you to specify the idle
Timeout connection interval. This timeout
(minutes) interval determines how long the
Secure Access device maintains idle
connections for client-side Windows
Secure Access methods.
Configuring General Network Settings (NSM Procedure) on page 271
Configuring Internet Protocol Filters (NSM Procedure) on page 276
Your Action
Select one of the following options
from the drop-down list:
Auto-select enabled— Secure
Access device uses NCP for most
client/server communications and
then switches to standard NCP
when necessary.
Auto-select disabled—Secure
Access device uses standard NCP
for client/server communications.
This option is primarily provided for
backwards compatibility.
Set the idle connection interval.
Set the idle connection interval.
Copyright © 2010, Juniper Networks, Inc.