Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual page 119

Copyright © 2010, Juniper Networks, Inc.
Table 23: Citrix Terminal Services (Default ICA) Configuration
Details (continued)
Option
Host
Server Port
Create an access control policy
Citrix using default ICA > Bookmarks tab > General tab
Name
Description
Host
Server Port
Screen Size
Color Depth
Username
Chapter 9: Configuring Secure Access Resource Profiles
Function
Specifies the server and port to
which this resource profile
should connect.
Specifies the port on which the
terminal server listens.
Allows you to access the server
specified in the Server Port box
(enabled by default).
Specifies the name of the
session bookmark.
Describes the session bookmark.
Specifies the existing host of the
resource profile that connects
to a Citrix terminal server on the
Secure Access device.
Specifies the existing server port
of the resource profile that
connects to a Windows terminal
server on the Secure Access
device.
Specifies the screen size of the
terminal services window on the
user's workstation.
Allows you to change the
color-depth of the terminal
session data.
Specifies the username that the
Secure Access device should
pass to the terminal server.
Your Action
Enter a hostname or IP
address.
Enter the port.
NOTE: By default, the
Secure Access device
populates this field with port
number 1494 for Citrix.
Select the Create an access
control policy check box to
enable this feature.
Enter the name.
Enter a description.
The Secure Access device
automatically populates the
Host box using settings from
the selected resource profile
The Secure Access device
automatically populates the
Server Port box using
settings from the selected
resource profile.
Select the screen size from
the drop–down list.
NOTE: By default, the
Secure Access device sets
the window size to full
screen.
Select the color depth from
the drop–down list.
NOTE: By default, the
Secure Access device sets
the color depth to 8-bit.
Enter the username.
101