Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual page 191

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Table 43: RADIUS Server Configuration Details (continued)
Option Function
Backup Radius Server Specifies a secondary RADIUS server
for the Secure Access device to use
if the primary server—the one
defined in this instance—is
unreachable.
Backup Authentication Specifies the authentication port for
Port the backup RADIUS server.
Backup Shared Secret Specifies a string for the shared
secret.
Backup Accounting Specifies the accounting port for the
Port backup RADIUS server.
Radius Accounting tab
User-Name Specifies the user information that
the Secure Access device should
send to the RADIUS accounting
server.
Interim Update Interval Enables you to accomplish more
(minutes) precise billing for long-lived session
clients and in case of a network
failure.
Use NC assigned IP Uses the IP address returned from
Address for the Secure Access device for the
FRAMED-IP-ADDRESS framed-IP-address attribute.
attribute
Configuring a Secure Access Anonymous Server Instance (NSM Procedure) on page 174
Configuring a Secure Access eTrust SiteMinder Server Instance (NSM Procedure) on
page 174
Configuring a Secure Access LDAP Server Instance (NSM Procedure) on page 167
Chapter 11: Configuring Authentication and Directory Servers
Your Action
Enter a secondary RADIUS
server name or IP address.
Enter the port value.
Enter a string for the shared
secret.
Enter the port value.
Enter a name.
The default variables for this
field are:
<username>—Logs the
user's Secure Access device
username to the accounting
server.
<REALM>—Logs the user's
Secure Access device realm
to the accounting server.
<ROLE>—Logs the user's
Secure Access device role to
the accounting server. If the
user is assigned to more than
one role, the Secure Access
device comma-separates
them.
Enter the time.
Select the Use NC assigned IP
Address for
FRAMED-IP-ADDRESS
attribute check box.
173