Monitoring Hierarchical Qos Parameters; Complete Configuration Example; Qos Administrator Configuration - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - QUALITY OF SERVICE CONFIGURATION GUIDE 2010-09-22 Configuration Manual

JunosE 11.3.x Quality of Service Configuration Guide

Monitoring Hierarchical QoS Parameters

Complete Configuration Example

250
host1(config-if)#exit
Create an implicit parameter instance at S-VLAN subinterface 10.
3.
a. Specify the Gigabit Ethernet interface at slot 2, port 0.
b. Attach the qp-shape-svlan QoS profile to the node at S-VLAN subinterface 10.
host1(config)#interface gigabitEthernet 2/0
host1(config-if)#svlan 10 qos-profile qp-shape-svlan
After completing the configuration, both the QoS administrator and the QoS client can
monitor it by issuing the show qos-parameter references command. To display the
information about hierarchical parameter instances, you must specify the Gigabit Ethernet
interface.
host1#show qos-parameter max-sub-bw references interface gigabitEthernet 2/0
interface
--------------------------- ---------- ------- ------------
GigabitEthernet2/0 svlan 10 max-sub-bw 3072000 hierarchical
GigabitEthernet2/0.100
GigabitEthernet2/0.101
Explicit parameter instances:
Hierarchical parameter instances:
IP multicast parameter instances:
Parameter instances reported:
You can use the complete configuration examples provided for each of the configurations
in your own network. To customize the configuration example for your needs, copy the
text into a text editor, and modify it.
To use the example for immediate use, copy it to the local console or Telnet session from
which you access the router.
You can also save the example as a script (.scr) file that executes the commands as
though they were entered at the terminal. For information about executing .scr files, see
JunosE System Basics Configuration Guide.

QoS Administrator Configuration

From Global Configuration mode:
! Configure the max-sub-bw QoS parameter definition.
qos-parameter-define max-sub-bw hierarchical
controlled-interface-type svlan
controlled-interface-type vlan
instance-interface-type vlan
subscriber-interface-type vlan
exit
! Configure the sp-shape-cvlan and sp-shape-svlan scheduler profiles.
scheduler-profile sp-shape-cvlan
parameter instance
name value Type
max-sub-bw 1024000 explicit
max-sub-bw 2048000 explicit
2
1
0
3
Copyright © 2010, Juniper Networks, Inc.