Show Bridge Multicast Address-Table - Dell PowerConnect 3424 Cli Reference Manual

Example
In this example, the number of addresses present in all VLANs are displayed.
Console# show bridge address-table count
Capacity: 8192
Free: 8083
Used: 109
Secure addresses: 2
Static addresses: 1
Dynamic addresses: 97
Internal addresses: 9

show bridge multicast address-table

The show bridge multicast address-table Privileged EXEC mode command displays multicast
MAC address or IP address table information.
Syntax
show bridge multicast address-table [vlan vlan-id] [address mac-multicast-address | ip-
multicast-address] [format ip | format mac]
• vlan-id — A valid VLAN ID value.
• mac-multicast-address — A valid MAC multicast address.
• ip-multicast-address — A valid IP multicast address.
• format ip|mac — Multicast address format. Can be ip or mac. If the format is
unspecified, the default is mac.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
• A MAC address can be displayed in IP format only if it is in the range of 0100.5e00.0000-
0100.5e7f.ffff.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 3 / 0 6 – F O R P R O O F O N LY
112
Address Table Commands