Sntp Unicast Client Enable - Dell PowerConnect 3524 Cli Reference Manual

User Guidelines
• Use the sntp broadcast client enable Global Configuration mode command to enable Broadcast
clients globally.
• Use the sntp anycast client enable Global Configuration mode command to enable Anycast clients
globally.
Examples
The following example enables the SNTP client on Ethernet port 1/e3.
Console(config)# interface ethernet 1/e3
Console(config-if)# sntp client enable

sntp unicast client enable

The sntp unicast client enable Global Configuration mode command enables the device to use the
Simple Network Time Protocol (SNTP) to request and accept SNTP traffic from servers. Use the no
form of this command to disable requesting and accepting SNTP traffic from servers.
Syntax
• sntp unicast client enable
• no sntp unicast client enable
Default Configuration
The SNTP Unicast client is disabled.
Command Mode
Global Configuration mode.
User Guidelines
• Use the sntp server Global Configuration mode command to define SNTP servers.
Examples
The following example enables the device to use the Simple Network Time Protocol (SNTP) to request
and accept SNTP traffic from servers.
Console(config)# sntp unicast client enable
134
Clock