Teknion Navigate height-adjustable bench Manual page 235

height-adjustable bench
Section: ELECTRICS
STEP 6: Fasten Power Module assembly to underside of Cable Tray, make sure to line up holes of Cable Tray to holes from Brackets.
Installation Guides
POWER MODULE ASSEMBLY - 1
WARNING! *Do not connect to power source until installation is complete.
*Connection to the building power source must be performed by a licensed electrician.
*Not following these instruction could result in damage and/or injury.
*It is recommended that electrical connectionsbe made under the supervision of
a licensed electrician in accordance with applicable codes and regulations.
Date: Sept 2019 Page: 6 of 7
HABN_321b