Teknion nuova contessa Adjustment Features & Instructions

SEAT HEIGHT ADJUSTMENT

RIGHT
Seat height can be adjusted by
lifting the lever at the front of
the right armrest. When this lever
is lifted, the weight of the body
will cause the seat to lower, and
releasing it stops the seat at the
desired height. Lifting the lever
with no weight on the seat allows
it to rise.

4D ARM-WIDTH, DEPTH, PIVOT AND HEIGHT ADJUSTMENT

To adjust the width of the 4D arms,
grab the arm pad on both sides and
push to the left or to the right to the
desired position.
Simultaneously pivot the arm pad
inward or outward to the desired
angle. Arm pad depth can be
controlled by grabbing the pad and
sliding it forward or backward.

BACK TENSION ADJUSTMENT

Turning the grip found under
the left side of the seat limits
the back tilt travel and locks
the back. Travel is limited on 3
positions with back lock in the
upright position.
nuova contessa adjustment features &
instructions

Back tilt adjustment

Back tilt adjustment
Back tilt adjustment
Back tilt adjustment
BACK TILT ADJUSTMENT
LEFT
When the chair back is at the
desired angle, press the lever once
to lock it in position. Pressing the
lever again frees the chair back.
RIGHT
To adjust the arm height, press
the button below either arm
rest to raise or lower it to the
desired position.
Back tilt adjustment

SEAT DEPTH ADJUSTMENT

Lifting the slide levers under both
sides of the seat allows it to be
adjusted forwards and backwards.
RIGHT
Back tilt adjustment
Back tilt adjustment
n t e m t u s d j t a t i l c k
Back tilt adjustment
B a