Configuring Ipv6 Multicast Vlan Ports - 3Com 4510G Configuration Manual

To do...
Enter system view
Enter port view or port group
view
Configue the user port link type
as hybrid
Specify the user VLAN that
comprises the current user
port(s) as the default VLAN
Configure the current user
ports to permit packets of the
specified IPv6 multicast VLAN
to pass and untag the packets
For details about the port link-type, port hybrid pvid vlan, and port hybrid vlan commands, refer to
VLAN Commands in the Access Volume.

Configuring IPv6 Multicast VLAN Ports

In this approach, you need to configure a VLAN as an IPv6 multicast VLAN and then assign user ports
to this IPv6 multicast VLAN by either adding the user ports in the IPv6 multicast VLAN or specifying the
IPv6 multicast VLAN on the user ports. These two methods give the same result.
Configure IPv6 multicast VLAN ports in IPv6 multicast VLAN view
Follow these steps to configure IPv6 multicast VLAN ports in IPv6 multicast VLAN view:
To do...
Enter system view
Configure the specified VLAN
as an IPv6 multicast VLAN and
enter IPv6 multicast VLAN
view
Assign port(s) to the IPv6
multicast VLAN
Use the command...
system-view
interface interface-type
interface-number
port-group manual
port-group-name
port link-type hybrid
port hybrid pvid vlan vlan-id
port hybrid vlan vlan-id-list
{ tagged | untagged }
Use the command...
system-view
multicast-vlan ipv6 vlan-id
port interface-list
5-5
Remarks
—
Required
Use either approach.
Required
Access by default
Required
VLAN 1 by default
Required
By default, a hybrid port
permits only packets of VLAN 1
to pass.
Remarks
—
Required
No IPv6 multicast VLAN
configured by default
Required
By default, an IPv6 multicast
VLAN has no ports.