Changing Verification Options - 3Com 3CRWX120695A Reference Manual

376 C 8: M
HAPTER ANAGING
Changing Verification
Options
WX S I
YSTEM MAGES AND
You can disable rules on a per-instance basis or globally for all instances.
If you disable a rule for a specific instance, 3WXM stops alerting you
about that particular instance but still uses the rule when evaluating
other configurations.
If you disable a rule for all instances, 3WXM stops using that rule
altogether when verifying a configuration.
Rules that are disabled for all instances are disabled on a per-user basis,
not a per-plan basis. When you disable all instances of a rule, the rule is
disabled for any network plan that you open while you are logged on
with the 3WXM client user name you were logged on with when you
disabled the rule.
To disable a specific instance of a warning or error
1 Select the warning or error message.
2 In the Resolutions section, click disable this rule for this instance only.
As soon as you click on this option, the message disappears from the list.
3WXM will not display this particular instance of the message again.
To globally disable a warning or error
1 Select an instance of the warning or error message.
2 In the Resolutions section, click disable this rule for all instances.
As soon as you click on this option, all instances of the message disappear
from the list. 3WXM will not display the message again.
By default, 3WXM verifies configuration information in the following
cases:
When the WX switch's configuration is changed in 3WXM.
When you deploy or export a WX switch from 3WXM to the network.
When you upload a WX switch from the network into 3WXM.
3WXM verifies the WX switch's entire configuration by default each time
a change occurs.
In addition, 3WXM allows you to deploy or export configuration changes
that cause error messages by default.
C
ONFIGURATIONS