Creating Mac Address Users - 3Com 3CRWX120695A Reference Manual

5 In the User Group Name box, type a name for the user group (1 to 60
alphanumeric characters, with no spaces or tabs).
6 In the VLAN Name box, type the VLAN that the user group belongs to
(1 to 16 alphanumeric characters, with no spaces or tabs). The WX switch
will authorize the users in this group for that VLAN. For more information
on VLANs, see "Configuring VLANs" on page 188.
7 Click Choose Available.
8 Select a user to be included in this user group.
9 Repeat step 7 and step 8 for each user you want included in this group.
10 Do one of the following:
Creating MAC When creating MAC address users, you configure authentication
Address Users properties. You can optionally configure user attributes, which are stored
in the local database.
Creating and Managing Users in the Local User Database
To select multiple contiguous users, click Shift while selecting.
To select multiple noncontiguous users, click Ctrl while selecting.
To configure user attributes, see "Configuring User Authorization
Attributes" on page 310.
To close the Create User Group wizard and save the changes, click
Finish.
307