To Change Monitoring Settings - 3Com 3CRWX120695A Reference Manual

To change monitoring
settings
To change monitoring settings, use the following procedure.
1 Select Tools > 3WXM Services Setup. The 3WXM Services Setup dialog
box appears. (See Figure 17 on page 536.)
2 Click the Monitoring Settings tab.
3 To change the number of minutes between status queries from the
monitoring service to the WX switches it monitors, change the value in
the Polling interval box. You can specify from 1 to 60 minutes. The
default is 5 minutes.
Changing Monitoring Settings 555