3Com 3CRWX120695A Reference Manual page 465

Filtering Events by Severity
You can limit the events you see in Event tab based on event severity.
1 Click on the Severity tab.
2 Select or clear the severity levels to display (the following descriptions are
WX-based):
Emergency — The WX is unusable.
Alert — Action must be taken immediately.
Critical — You must resolve the critical condition. If you do not
resolve the condition, the WX might reboot or shut down.
Error — The WX is missing data or unable to form a connection.
Warning — A possible problem exists.
Notice — Events that potentially can cause system problems have
occurred. These are logged for diagnostic purposes.
Info — Informational messages only. No problems exist.
Debug — Output from debugging.
By default, all severity levels are selected. Toggle the All checkbox to
select or clear all severity levels.
3 After selecting the severity levels to log, click Refresh to see the filtered
events.
Filtering Events by Facility
You can limit the events you see in Event Viewer by network facility or
3WXM facility.
1 Click on the Facility tab.
2 Select or deselect individual facilities.
3 After selecting the facilities to log, click Refresh to see the filtered events.
Saving Filters
If you have specified additional criteria to filter the events you see in Event
Viewer, you can save the criteria as a stored custom filter.
To save a filter:
1 In the Stored Filters group box, type a new filter name in the Name box.
2 Type a name for the filter (1 to 80 alphanumeric characters, with no tabs).
Accessing the Event Log 465