To Modify Radio Settings - 3Com 3CRWX120695A Reference Manual

280 C 6: C
HAPTER ONFIGURING
To modify radio
settings
W P
IRELESS ARAMETERS
Select No to disable automatic firmware upgrading. Automatic firmware
upgrading is enabled by default.
9 Do one of the following:
To modify radio settings for the MAP, see "To modify radio settings".
To modify connection settings for the MAP, see "To modify a MAP
connection" on page 283.
To save changes and close the wizard, click Finish.
To modify radio settings, use the following procedure.
1 On the MAP page of the Wireless page of the WX Switch wizard, select a
MAP port, then click Modify MAP. The Modify MAP wizard appears.
2 Click Next. A radio page such as the following appears.
3 To enable the radio, select Enabled.
4 If the MAP model uses an external antenna, select the external antenna
model for the 802.11b/g radio from the Antenna Type box: