Changing Wx Connection Settings - 3Com 3CRWX120695A Reference Manual

550 A D: C
PPENDIX HANGING
Changing WX
Connection
Settings
M S
ONITORING ERVICE
changes to the WX switch. (See "Managing WX System Images and
Configurations" on page 369.)
9 Repeat step 7 and step 8 to change SNMP settings for other WX switches
if needed.
10 Click Save to save the changes or Cancel to cancel the changes.
11 Click another tab to configure more settings or click Close to close the
3WXM Services Setup dialog box.
The WX connection settings control the timeout and retries for
connections with monitored WX switches, and the types of certificates
the service will accept from the WX switches.
1 Select Tools > 3WXM Services Setup. The 3WXM Services Setup dialog
box appears. (See Figure 17 on page 536.)
2 Click the WXs Connection Settings tab.
P
REFERENCES