3Com 3CRWX120695A Reference Manual page 270

270 C 6: C
HAPTER ONFIGURING
W P
IRELESS ARAMETERS
outbound frame in buffer storage. The default value is 2,000 ms
(2 seconds).
7 In the Max. Rx MSDU Lifetime box, specify the maximum amount of time,
from 500 ms to 250,000 ms (250 seconds), the MAP can hold an
inbound frame in buffer storage. The default is 2000 ms (2 seconds).
8 In the RTS Threshold box, specify the minimum length (256 to 3000
bytes) a frame can be for the MAP to use the
Request-To-Send/Clear-To-Send (RTS/CTS) method to send the frame.
Frames smaller than the RTS threshold are not sent using the RTS/CTS
method. The default is 2346 bytes.
9 In the Short Retry Limit box, specify the number of times (1 to 15) the
MAP transmits an unacknowledged unicast frame that is shorter than the
RTS threshold before discarding the frame. The default is 5.
10 To advertise support of long preambles for 802.11b/g radios only, make
sure Enable Long Preambles is selected.
To disable this option, clear Enable Long Preambles. By default, this
option is enabled.
11 Do one of the following:
To configure RF Auto-Tuning, click Next and see "To configure
RF Auto-Tuning".
To configure other radio profile parameters, click a button at the top
of the wizard.
To close the wizard and save the changes, click Finish.