3Com 3CRWX120695A Reference Manual page 314

314 C 7: C
HAPTER ONFIGURING
A , A
UTHENTICATION UTHORIZATION
Table 22 Authentication Attributes for Local Users (continued)
Attribute Description
service-type Type of access the user
is requesting.
session-timeout Maximum number of
seconds for the user's
(network access
session.
mode only)
ssid SSID the user is
allowed to access after
(network access
authentication.
mode only)
start-date Date and time at which
the user becomes
eligible to access the
network.
MSS does not
authenticate the user
unless the attempt to
access the network
occurs at or after the
specified date and
time, but before the
end-date (if specified).
, A P
AND CCOUNTING ARAMETERS
Valid Value(s)
Access type, which can be one of the
following numbers:
2—Framed; for network user access
6—Administrative; for administrative
access, with authorization to access
the enabled (configuration) mode. The
user must enter the enable command
to access the enabled mode.
7—NAS-Prompt; for administrative
access to the nonenabled mode only.
In this mode, the enable command is
not available and the user cannot log
in to the enabled mode.
For administrative sessions, the WX
switch always sends 6 (Administrative).
The RADIUS server can reply with one
of the values listed above.
If the service-type is not set on the
RADIUS server, administrative users
receive NAS-Prompt access, and
network users receive Framed access.
Number between 0 and
4,294,967,296 seconds (approximately
136.2 years).
Name of the SSID you want the user to
use. The SSID must be configured in a
service profile, and the service profile
must be used by a radio profile
assigned to 3Com radios in the
Mobility Domain.
Date and time, in the following format:
YY/MM/DD-HH:MM
You can use start-date alone or with
end-date. You also can use
start-date, end-date, or both in
conjunction with time-of-day.