194
C
5: C
HAPTER
ONFIGURING
WX S
A
YSTEM AND
10 In the Aging Time box, specify the aging timeout period (0 to 1,000,000
seconds) for dynamic entries in the forwarding database. The default is
300 seconds (5 minutes). If you specify 0, aging is disabled.
11 Do one of the following:
To configure VLAN membership, click Next to display the VLAN
Member Selection page. (See "Adding Ports to a VLAN" on
page 194.)
To close the wizard and save the changes, click Finish.
Adding Ports to a VLAN
You can add ports or port groups (if you have defined them) to a VLAN.
After adding a port or port group, you can also assign a tag value to the
port or port group. A tag is a numeric value that identifies a virtual port
within the VLAN. The same VLAN can have different tag values on
different ports. However, a port can have only one tag value in a given
VLAN. A VLAN can also have untagged ports. An untagged port can be a
member of only one VLAN.
MSS supports the IEEE 802.1Q tag type, described in the IEEE 802.1Q
specification.
P
DMINISTRATIVE
ARAMETERS