Changing Verification Options - 3Com WX4400 Reference Manual

380 C 11: V
HAPTER ERIFYING
Changing Verification
Options
C C
ONFIGURATION HANGES
To globally disable a warning or error
1 Select an instance of the warning or error message.
2 In the Resolutions section, click disable this rule for all instances.
As soon as you click on this option, all instances of the message disappear
from the list. 3WXM will not display the message again.
By default, 3WXM verifies configuration information in the following
cases:
When the configuration is changed in 3WXM.
When you deploy or export a switch from 3WXM to the network.
When you upload a switch from the network into 3WXM.
3WXM verifies the entire switch configuration by default each time a
change occurs.
In addition, 3WXM allows you to deploy or export configuration changes
that cause error messages by default.
To change verification options
1 On the toolbar of the Verification panel click the Edit Verification
Options icon. The Verification Options dialog box appears.
2 Select the cases in which you want 3WXM to perform verification:
Verify changes only—3WXM performs verification only on
configuration items that change, instead of verifying the entire
configuration when any change in that configuration occurs.
Verify on edits—3WXM performs verification whenever you edit a
configuration.
Verify on deploy and export—3WXM performs verification when
you select the option to deploy switches from 3WXM to the live
network.
Verify on upload—3WXM performs verification when you select the
option to upload a switch's configuration from the network into
3WXM.
Allow errors to be deployed and exported—3WXM allows you to
deploy or export a configuration even if it contains errors.