In the Organizer panel, select Management Services under a WX
switch or Domain Policies, then select Edit > Properties. Click on
SNMP at the top of the wizard.
Here is an example of the SNMP page in the WX Switch wizard.
2 Select Enabled to enable SNMP service on the WX, or clear Enabled to
disable SNMP service. By default, SNMP is disabled.
3 You can edit the Read and Write community strings by double-clicking in
the Community column. The name can be 1 to 32 alphanumeric
characters, with no spaces or tabs.
Community string names are transmitted in clear text.
If you enable SNMP service on the WX, 3Com recommends that you
change the READ and WRITE community string names. The default
Configuring WX Management Services
215