308
C
7: C
HAPTER
ONFIGURING
A
, A
UTHENTICATION
UTHORIZATION
To configure MAC address user authentication properties
1 Access the WX Switch wizard for the WX switch. (See "Accessing the
Modify Switch Wizard" on page 185.)
2 Select AAA at the top of the wizard, if not already selected.
3 Select User from the organizer list on the left side of the page, if not
already selected.
4 Click New and select New MAC Address User. The Create MAC Address
User wizard appears.
5 In the User MAC Address box, type the MAC address for the user device,
using colons (:) as delimiters. You must specify all 6 bytes of the MAC
address.
6 In the VLAN Name box, type the name of the VLAN that the user device
belongs to (1 to 16 alphanumeric characters, with no spaces or tabs). The
WX switch will authorize the user for that VLAN. For more information on
VLANs, see "Configuring VLANs" on page 188.
7 In the MAC User Group list, select the MAC user group that the user
device belongs to, if the group is already configured.
,
A
P
AND
CCOUNTING
ARAMETERS