Generating A Client Errors Report - 3Com 3CRWX120695A Reference Manual

490 C 12: G
HAPTER ENERATING
Generating a Client
Errors Report
R
EPORTS
Current AP Statistics
Lifetime AP Statistics
(See "Using the Client Monitor Window" on page 420 for information
about the data columns in each section of the report.)
The client errors report lists error statistics for current client sessions.
The data for this report comes from the monitoring service. The Collect
client connection failure traps option, located in the Client Monitor
group box of the Monitoring Settings tab, and the Enable RF trending
option, located in the RF Monitor group box, must be enabled. (See
"Changing Monitoring Settings" on page 552.)
1 Select Reports > Client Errors from the toolbar in the main 3WXM
window.
The Client Errors Report dialog box appears.
2 Select the scope type of the report from the Report Scope Type listbox:
Mobility Domain
Wireless Switch
Site
Building
Floor
Coverage Area
3 Select the instance for which you want the report. For example, if the
scope is Building, select the building.
4 Select the time period for the report:
1 Hour
24 Hours
7 Days
30 Days
5 To change the output directory for the report, click on the button next to
output directory, navigate to the new directory, and click Select.