To add ACEs to an ACL and organize them
1 In the ACL Setup page, select an ACE from the list of ACEs.
2 If you have not already typed the ACL name in the ACL Name box, do so
now.
3 To change the position of the ACE, click Move Up or Move Down until
the ACE is in the position you want.
4 To move other ACEs, repeat step 1 and step 3 until all ACEs are in the
order you want.
An ACL contains an implicit rule that denies all access. If you create an
ACL with multiple ACEs, the implicit rule is placed at the end of the ACE
list.
5 To close the Create ACL wizard, click Finish.
Mapping ACLs
User-based ACLs are mapped to particular users at the time of
authorization.
You can also map ACLs to ports (or port groups), VLANs, or virtual ports.
These types of ACLs are processed after user-based ACLs because
user-based ACLs are more specific.
Using Access Control Lists for Security
359