3 To set the amount of time that 3WXM waits for a connection to be
established to a WX before trying to connect again, specify the timeout
(1 to 30 seconds) in the Connect Timeout box. The default is 5 seconds.
4 To set the number of times (0 to 5) 3WXM tries to reconnect to the WX
after the original attempt, specify the value in the Retry Count box. The
default is 3 times.
For example, if the retry count is 3, 3WXM attempts to establish a
connection to a WX four times. If you specify 0, 3WXM does not attempt
to establish a connection if the first attempt is unsuccessful.
5 To have network status changes sent by email, select Enable e-mail
notification.
To disable this option, clear Enable e-mail notification. By default, this
option is disabled.
A message is sent when the status of the WX changes. If multiple status
changes occur during a short span of time, 3WXM automatically sends
one combined message rather than multiple individual messages.
6 In the SMTP E-mail Server box, type the name of a Simple Mail Transfer
Protocol (SMTP) email server.
7 In the From E-mail box, type the email address of the person who sends
the email notification.
8 In the To E-mail box, type the email address of the person to receive email
notification of network status change.
9 Click Close to close the Preferences dialog box, or click another tab to
continue making changes.
Changing Network Synchronization Options
503