Generating A Work Order - 3Com 3CRWX120695A Reference Manual

Generating a Work
Order
A work order provides all of the necessary information for the physical
installation of the 3Com Mobility System. A work order shows where the
MAP access points should be installed, WX initial setup configuration
information, and projected RSSI information that is useful when verifying
the installation.
The work order has meaning only after you add planning information.
(See "Planning the 3Com Mobility System" on page 93.)
1 Select Reports > Work Order from the toolbar in the main 3WXM
window.
The Work Order Generation dialog box appears.
2 Select the scope for the work order. You can select the network plan, a
site, a building, or an individual floor.
3 Select the options you want to use for the report:
RF Coverage
RSSI Projections
Show Disabled MAPs (only available if RSSI Projections is selected)
Show RF Coverage On Entire Floor (only available if RSSI
Projections is selected)
Show Unreachable MAPs (only available if RSSI Projections is
selected)
Show MAPs on Other Floors (only available if RSSI Projections is
selected)
4 Select the language:
English
German
5 To change the output directory for the report, click on the button next to
output directory, navigate to the new directory, and click Select.
6 Click Generate.
7 When the report is generated, click View. A browser window containing
the report opens.
8 Optionally, select the floor.
9 Click View Work Order.

Generating a Work Order

497