Distributing Image And Configuration Files; Using The Image Repository - 3Com 3CRWX120695A Reference Manual

Distributing Image
and Configuration
Files
Using the Image
Repository
By default, this option is selected. If you deselect this option, 3WXM
sends the configuration changes to the WX switch but the changes are
not saved in the WX switch's configuration file and are therefore not
restored following a restart of the WX switch.
3 Click Deploy Now.
The deployment status for each affected WX is shown on the History tab
at the bottom of the dialog box.
If errors occur, click Selected Errors to view the errors. If there are errors,
fix them and verify the changes before trying to deploy again. (You can
use the Verification tab to fix the errors. See "Verifying Configuration
Information" on page 373.)
4 Click Close to return to the Managed Devices tab.
5 If the network plan is successfully deployed and synchronized, save the
network plan at this time.
You can manage WX system image and configuration files by using the
Distribute Images & Configuration dialog box. You can distribute system
image and configuration files in the following ways:
System image files only
System image and configuration files together
Configuration files only
If you choose to manage files this way, be aware that 3WXM does not
verify the configuration and system image compatibility. Compatibility is
verified when you deploy a network plan.
Use the image repository to add or delete WX system images. The image
file is checked and its version is verified when added to the image
repository. Images are stored in the
3wxm_installation_directory\xml\images directory.
To add a system image
1 Select Tools > Image Repository. The Image Repository dialog box
appears.
2 Click Add Image. The Add to Repository dialog box appears.
3 Navigate to the directory containing the system image.

Distributing Image and Configuration Files

393