3 Enter the information for the AP and place the icon for the AP in its floor
To display the list
To remove a
third-party AP
1 In the Organizer panel, click on Third Party APs. The third-party APs are
2 Right-click on the third-party AP you want to remove and select Delete.
location, if applicable. (See "Adding a Third-Party Access Point" on
page 148.)
In the Organizer panel, click on Third Party APs. The third-party APs are
listed.
To remove a third-party AP, use the following procedure.
listed.
The address is removed from the third-party AP list. If the device is
detected by rogue detection, the device appears in the rogue list. Set the
display filter of the Rogue Detection tab to Current and click the Refresh
option on the tab's toolbar.
Converting a Rogue into a Third Party AP
481