Applying Rf Auto-Tuning Settings To The Network Plan - 3Com 3CRWX120695A Reference Manual

Applying
RF Auto-Tuning
Settings to the
Network Plan
A browser must be specified in the Tools tab in the Preferences dialog box
(Tools > Preferences).
7 Select a floor from the Select Floor list and click View Work Order. The
work order is displayed starting at the floor you specified. You can scroll
to view additional information.
8 In the Building wizard, click Finish to close the wizard.
If RF Auto-Tuning is running on MAP radios in the network, you can
update the radios in the network plan with the channel and power
settings currently in effect on the same radios in the network.
This option also disables RF Auto-Tuning on the radios. When
RF Auto-Tuning is disabled, the channel and power settings on the radios
are static.
To apply RF Auto-Tuning settings:
1 From the toolbar in the main 3WXM window, select
Changes > Apply Auto-Tune Settings. The Apply Auto-Tune Settings
wizard appears.

Applying RF Auto-Tuning Settings to the Network Plan

175