Configuring Basic Wx Properties - 3Com 3CRWX120695A Reference Manual

186 C 5: C
HAPTER ONFIGURING
Configuring Basic
WX Properties
WX S A
YSTEM AND DMINISTRATIVE
To configure basic WX properties, do the following steps.
1 Access the WX Switch wizard for the switch. (See "Accessing the Modify
Switch Wizard" on page 185.)
2 Select System and Administrative at the top of the wizard, if not already
selected.
3 Select WX Properties from the organizer list on the left side of the page, if
not already selected.
4 In the WX Name box, type the name of the WX switch (1 to 256
alphanumeric characters, with no spaces or tabs).
Within a network plan (and all Mobility Domains), each WX must have a
unique name.
5 In the WX Model list, select the WX switch model.
P
ARAMETERS