To Change 802.11 Attributes - 3Com 3CRWX120695A Reference Manual

To change 802.11
attributes
1 In the Create Radio Profile wizard, click 802.11 Attributes. The 802.11
2 In the Beacon Interval box, specify the interval at which the MAP
3 In the DTIM Period box, specify the number of beacons (1 to 31) the MAP
4 In the Fragment Threshold box, specify the maximum length
5 In the Long Retry Limit box, specify the number of times (1 to 15) the
6 In the Max. Tx MSDU Lifetime box, specify the maximum amount of time,
To change 802.11 attributes, use the following procedure.
Attributes page appears.
advertises its SSIDs. You can specify from 25 to 8191 milliseconds (ms).
The default is 100 ms.
transmits before transmitting the multicast and broadcast frames stored
in its buffers. The default is 1.
(256 to 2346 bytes) a frame can be without being fragmented by the
MAP before transmission. The default is 2,346 bytes.
MAP transmits an unacknowledged unicast frame that is longer than the
RTS threshold before discarding the frame. The default is 5.
from 500 ms to 250,000 ms (250 seconds), the MAP can hold an
Configuring a Radio Profile 269