494
C
12: G
HAPTER
ENERATING
Generating a Radio
Details Report
R
EPORTS
Building
Floor
Coverage Area
3 Select the instance for which you want the report. For example, if the
scope is Building, select the building.
4 Select the time period for the report:
1 Hour
24 Hours
7 Days
30 Days
5 To change the output directory for the report, click on the button next to
output directory, navigate to the new directory, and click Select.
6 To prevent 3WXM from replacing an existing report of the same type with
this new report, click next to Overwrite Existing Files to deselect this
option.
7 Click Generate.
8 When the report is generated, click the report link to view it.
The RF summary report contains the following sections:
Cumulative data for the scope of the report
Detailed data for each WX switch within the scope of the report
The radio details report lists details about an individual radio.
The data for this report comes from the monitoring service. The Enable
RF trending and Collect radio activity traps options, located in the RF
Monitor group box of the Monitoring Settings tab, must be enabled. (See
"Changing Monitoring Settings" on page 552.)
1 Select Reports > Radio Details from the toolbar in the main 3WXM
window.
The Radio Details Report dialog box appears.
2 Select the radio for which you want the report.
The scope is always MAP Radio and cannot be changed.