3Com 3CRWX120695A Reference Manual page 216

216 C 5: C
HAPTER ONFIGURING
WX S A
YSTEM AND DMINISTRATIVE
strings are commonly used and can easily be guessed. You cannot edit
the TRAP community string.
4 You can enable the following SNMP traps:
Authentication — Generated when the WX switch's SNMP agent
receives a bad community string.
LinkDown — Generated when the link is lost on a port.
LinkUp — Generated when the link is detected on a port.
DeviceFail — Generated when an event with an Alert severity occurs.
DeviceOkay — Generated when a device returns to its normal state.
PoEFail — Generated when a serious PoE problem, such as a short
circuit, occurs.
MAPTimeout — Generated when a MAP access point fails to
respond to the WX switch.
MobilityDomainJoin — Generated when the WX switch is initially
able to contact a mobility domain seed member, or can contact the
seed member after a timeout.
MobilityDomainTimeout — Generated when a timeout occurs after
a WX switch has unsuccessfully tried to communicate with a seed
member.
MichaelMICFailure — Generated when two Michael message
integrity code (MIC) failures occur within 60 seconds, triggering Wi-Fi
Protected Access (WPA) countermeasures.
RogueDetect — Generated when MSS detects a rogue access point.
MAPBoot — Generated when a MAP access point boots.
RFDetectAdhocUser — Generated when MSS detects an ad-hoc
user.
RFDetectRogueDisappear — Generated when a rogue access point
is no longer being detected.
ClientAuthenticationFailure — Generated when authentication
fails for a client.
ClientAuthorizationFailure — Generated when authorization fails
for a client.
ClientAssociationFailure — Generated when a client's attempt to
associate with a radio fails.
P
ARAMETERS