Displaying Object Details - 3Com 3CRWX120695A Reference Manual

Displaying Object
Details
Select an
object
Sites — The display is restricted to coverage areas. Objects for
individual access points are not displayed, although you can expand a
coverage area to list the individual 3Com radios in the coverage area.
However, regardless of whether Details is enabled, you can drill down to
display details at the individual radio level if needed.
To display details for an object in the Organizer panel, select the object.
Details about the object appear in the Information panel, located at the
bottom right of the main 3WXM window. For example, select a Mobility
Domain to display the system IP address and system name of the seed
switch for the domain.
In addition, if the 3WXM monitoring service is running and 3WXM is
enabled to receive information from it, monitored data for the object
selected in the Organizer panel is displayed in separate monitoring
windows in the Content panel. To open the Monitor tab and display
Organizer Panel 45
Details are
displayed here