To Configure Rf Auto-Tuning - 3Com 3CRWX120695A Reference Manual

To configure
RF Auto-Tuning
1 In the Create Radio Profile wizard, click Auto-Tune. The Auto-Tune page
2 To enable automatic configuration and tuning of the transmit power,
3 To change the interval at which RF Auto-Tuning decides whether to
4 To change the interval at which radios reduce power after temporarily
To configure RF Auto-Tuning, use the following procedure.
appears.
select Yes next to Tune Transmit Power. This feature is disabled by
default.
change the power level on radios, change the value in the Tx. Power
Tuning Interval box. You can specify from 1 to 65535 seconds. The
default is 300 seconds.
increasing the power to maintain the minimum data rate for an
associated client, change the value in the Tx. Power Backoff Timer box.
At the end of each power-backoff interval, radios that temporarily
increased their power reduce it by 1 dBm. The power backoff continues
in 1 dBm increments after each interval until the power returns to
expected setting.
Configuring a Radio Profile 271