260
C
6: C
HAPTER
ONFIGURING
Configuring
Encryption
W
P
IRELESS
ARAMETERS
To configure encryption, follow these steps:
1 In the Create Service Profile wizard, click Encryption. The Encryption
page appears.
2 In the Security Mode list, select WEP, WPA, or WEP+WPA. The default is
WEP.
Microsoft Windows XP does not support WEP with WPA. To configure a
radio profile to provide WEP for XP clients, select WEP. Do not select
WEP+WPA.
3 Go to one of the following sections:
"Configuring WEP"
"Configuring WPA" on page 262
Configuring WEP
By default, dynamic WEP is enabled. You do not need to specify any WEP
keys when using dynamic WEP.