Defining Radius Default Values - 3Com 3CRWX120695A Reference Manual

Defining RADIUS
Default Values
1 Access the WX Switch wizard for the WX switch. (See "Accessing the
2 Select AAA at the top of the wizard, if not already selected.
3 Select Default RADIUS Parameters from the organizer list on the left side
RADIUS server groups can authenticate administrators and network
users. You can specify up to four RADIUS server groups for AAA services
in a 3Com Mobility System.
Although you can use the local database on the WX switch to
authenticate users, 3Com recommends using RADIUS to accommodate
the large number of users in an enterprise network.
For information about the RADIUS attributes supported by Mobility
System Software (MSS), see the Wireless LAN Switch and Controller
Configuration Guide.
You can set default values for certain RADIUS parameters that apply to
RADIUS servers and server groups you create for an individual WX. The
following RADIUS parameters, except system IP address, are defined with
default values, which you can change:
Timeout (generally set for only troubleshooting purposes)
Retry count (generally set for only troubleshooting purposes)
Dead time
Key
Authorization password
Use of system IP address
To change default values for RADIUS parameters
Modify Switch Wizard" on page 185.)
of the page, if not already selected.
Connecting to RADIUS Servers and Server Groups 293