You configure DNS by performing the following tasks:
Enable the DNS client and configure a default domain name for DNS
queries.
Specify the IP addresses of the DNS servers.
Setting Up DNS Basic Properties
To set up DNS basic properties:
1 Do one of the following:
Open the WX Switch wizard, then select DNS under IP Services in the
organizer list of the System and Administrative page.
In the Organizer panel, select IP Services under a WX switch or
Domain Policies, then select Edit > Properties. The Modify IP Services
wizard appears. Click on DNS at the top of the wizard.
Here is an example of the DNS page in the WX Switch wizard.
Configuring IP Services
245